How to Connect Multiple Speakers to Home Stereo

How To Connect Multiple Speakers To Home Stereo

If you are a music enthusiast, I bet you have dreamt of enjoying a cinematic audio quality at your own space. Trust me, in this modern decade, it isn’t a dream anymore. Just connect the multiple speakers with the home theater or receiver & your dream music system is ready to function. But how to connect multiple speakers to Home Stereo? 

It may sound Really difficult but honestly you don’t even require assistance or technicians once you understand its basics. Firstly check out the impedance of both of your speakers & receiver to determine whether to connect the speakers in parallel or in series. Now get the required wires, connect them appropriately & your circuit is ready to function.

Don’t worry if it’s your first time. You are not alone out there as we have got your back. In our content below we have highlighted a step-by-step guideline for connecting multiple speakers with the room audio system. So, are you excited to experience the dreamy cinematic sound in your own room?

How To Hook Up Multiple Speakers To An Amplifier? 

‘How to hook up multiple speakers to an amplifier?’ 

‘Is it possible to connect speakers with a room audio system without taking assistance?’

Well, yes. It’s super easy once you get the basics. All you need is multiple speakers, amplifier/ receiver, some split cables & you are ready to go!

Step 1: Determination Of Maximum Output Of Both Of The Speakers & Amplifier

Before proceeding with the wiring of Speakers with the Amplifier, a user has to determine the maximum output of them. Usually these outputs are measured in ohm. If you are not aware of the stereo output of your device, just check out the posterior aspect of the Amplifier & Speakers. Be aware, the speaker must not exceed the amplifier output.

Step 2: Turn Off The Amplifier

Unplug the Amplifier from the electrical socket & turn it off completely.

Step 3: Determine The Preferred Wiring Procedure

Now it’s time to consider the stereo outputs in order to determine which wiring will suit your requirements. Generally, there are 3 wiring methods including series, parallel & the combination method. High ohms are suitable for series wiring where low ohms are necessary for parallel connections. Many customers prefer combination Connection as it can balance out the loads.

Step 4: Series Mode

Among all, this procedure seems to be the easiest one. Firstly connect the red positive wire of the Amplifier with the positive input of the speaker. Now, the non-red negative wire of the speaker with the positive wire input if the next one. Continue the same procedure to connect all the speakers together. Lastly take the negative end of the last speaker & connect it with the negative end of the amplifier.

Step 5: Parallel Mode

Firstly get some split wires to connect multiple speakers in parallel mode. Take the positive end of the amplifier & connect it with the positive input of the 1st speaker. Connect the split wires with the negative ends of all the speakers. Lastly create a single end of the cables & connect it with the amplifiers negative wires. Now the parallel wiring of speakers is perfectly ready to function.

Step 6: Combination Mode

Here comes the combination mode, which is probably the most convenient wiring system among all. In this segment, you have to connect two speakers in the series mode at the beginning. Take a split cable to connect the second set with the first set. Utilize the same technique to hook up all the speakers together & form a single cable. Lastly just connect the cable with the negative jack & your combination connection is ready. 

So, what do you think? Wasn’t it super easy? Do you think you require a technician just for hooking up multiple speakers to a receiver or amplifier? I bet our step-by-step guidelines have changed your mind. 

Should You Go For A Series Or Parallel Connection?

Now you may wonder when to connect speakers in parallel mode or series mode. It’s obviously not a ‘ personal preference’ thing. There must be some physical factors to consider. Yes, obviously. So, keep reading below & choose the best wiring mode for your home stereo system right away!

Impedance: 

Basically impedance is similar to resistance which tends to minimize the flow of current. However, in a circuit resistance usually remains constant where impeded keep altering due to the variation of frequencies. All electrical audio components like speakers & amplifiers come with a specific impedance. When the impedance of the speaker matches up with the Amplifier’s impedance, the audio system will function at its best.

So, it’s a must to match up a 4-ohm speaker with an amplifier with 4 ohm output. Never mismatch the impedance especially when you are concerned with loud music as it will cause severe damage to the amplifier circuits. 

When To Connect The Speakers In Parallel?

If all of your speakers have high impedance (around 8 ohm or more) it would be best to go for parallel connections. For instance, two 8-ohm parallel speakers will result in a load of 4-ohm. Nowadays, most receivers can take a minimum load of 4-ohm or more but not lower than that. If your receiver supports minimum 6 or 8-ohm load minimally, go for the series mode instead.

When To Connect The Speakers In Series? 

Now let’s focus on the opposite side of the coin. If all of your speakers have low impedance (< 8 ohm), go for series connect without worries. Series connections are also suitable for amplifiers with high load of impedance (>4 ohm). 

For instance, if you have 2 speakers of 6 ohm, they will create a total load of 12 ohm together. Generally, all amplifiers work perfectly with an average impedance range of 6 to 16 ohm.

Actually, the real wiring for a home audio system may require numerous speakers. So, that time you will mostly be using the combination of series & parallel mode to achieve the required impedance & resistance. 

How To Connect Multiple Bluetooth Speakers To The PC? 

Till now we were focusing on wired speakers & their connection with the receiver. But how to connect Bluetooth Speakers to room audio or PC? If you have previous experience of connecting devices by bluetooth then this procedure will be a piece of cake for you.

Step 1: Turn On Bluetooth

  • Firstly, turn on the Bluetooth network of all of the speakers.
  • All the Bluetooth Speakers should be of the same brand & model. Thus, they can easily connect with each other.

Step 2: Pair The Speakers With PC

  • Click on the search bar of the PC & type ‘Bluetooth’.
  • Turn on the Bluetooth network of the PC by sliding the bar to the left.
  • Keep the speakers near the PC and turn on the pairing button.
  • Now click on Bluetooth & ‘other devices’ respectively. Once the page has refreshed, click on ‘add other devices’.
  • Now look for the speaker’s name in the list. In case the name doesn’t appear, refresh it once again.
  • After finding the device, follow the provided instructions & pair it with your PC.
  • Utilize the same procedure to connect other Bluetooth Speakers as well.

Step 3: Set Up Via Built-in Speaker App (Optional)

This step is only for the users whose speakers have built-in apps to establish a connection. 

  • Open the app.
  • Look for an option called ‘Multiple Outlet’ or ‘Multiple Speakers’.
  • Click on the option & follow their general instruction for pairing.

Step 4: Set The Bluetooth Speakers As The Default Speaker

This step is mandatory to completely hook up the Bluetooth Speakers with your home stereo system. If the Bluetooth Speakers are not set as the default speakers, the laptop’s built-in speaker will keep on working even after pairing. In this context –

  • Tap on the search bar & search for audio.
  • A menu will show up to manage devices.
  • The ‘manage device’ bar offers multiple options to choose a default audio output. Click on the speaker’s names & set it as default.

Now try to play music & check out if the Bluetooth connection has been established successfully or not.

FAQ: 

Can you Connect more than 2 Speakers to a stereo?

The word ‘stereo amplifier’ basically refers to a stereo system where 2 amplifiers are arranged inside a box. Generally, an amplifier can efficiently cope up with the load of two speakers. Connecting more than two speakers with an amplifier might take a toll on it. As the stereo system features 2 amplifiers together, you can easily connect 4 speakers with the home stereo without any risk of overloading.

Can you hook up multiple speakers to a receiver? 

Yes, if the receiver features numerous power channels & speaker connections, it can easily take the load of multiple speakers. 

How many speakers can you hook up to a receiver?

Nowadays, most home theater receivers offer around 7, 9 or 11 power channels. Some receivers even feature more numerous speaker connections than the channels. For instance, if you own a receiver with 11 output & 9 power channels; it can easily support 9 speakers along with the stereo speakers of another room.

How to connect multiple speakers to one output?

In order to establish a connection between multiple speakers & one output, you can either go for a series or a parallel arrangement depending upon the required ohms load.

Series Mode:

  • Firstly, rip the insulation off to reach the bare wire. 
  • Take the speaker wire & connect it with the positive terminal of the output & first speaker respectively.
  • Now connect the negative wire of the first speaker with the positive terminal of the next speaker & keep continuing the procedure.
  • Connect the last negative speaker terminal with the negative amplifier terminal & your series circuit is ready to function.

Parallel Mode:

  • Take a speaker wire & connect it with the positive wires of each speaker.
  • Both of the speaker’s positive wires should be wired with the same positive terminal.
  • Now take the speaker wires and connect it with each speaker’s negative terminal.
  • Lastly connect the negative wires to the negative terminal of the amplifier.

Final Words: 

‘How to connect multiple speakers to Home Stereo?’

If you have interest in music, then this query must have popped up in your mind once in a while. You might have also thought of connecting them together but never got the courage. Ain’t I right? I bet I’m & that’s why you have chosen our article to read. 

After going through our content till now, what do you think? Wasn’t it easy? Will you really hire professionals just to connect some speakers? I believe you won’t. After going through our step-by-step guidelines, wiring the speakers together will be a piece of cake. Be very aware to unplug the speakers & amplifiers for the utmost safety. If you are still nervous, don’t be. Take your first step & enjoy amazing sound quality in your own room now!

Share This Post

Leave a Comment

Your email address will not be published.

Scroll to Top