Top 10 Best Bearing Puller Kit In [2022]

Last Update:

You can trust our selection for Bearing Puller Kit Reviews. Because We have worked hard studying and analyzing 35453 reviews for Bearing Puller Kit and rating them. It was a difficult job to list only ten products for Bearing Puller Kit where thousands of them available online. I hope it will help you to take final decision for Best Bearing Puller Kit.

Best Bearing Puller Kit

Comparison Chart for Best Bearing Puller Kit

In this article we've included our suggestions for the Bearing Puller Kit after analyzing 35453 reviews.

NoProductScoreAction
1DAYUAN Inner Bearing Puller Set Remover Slide Hammer Internal Kit 8-32mm 9pc Blind Hole9.6Buy On Amazon
2Bearing Puller Set, 5-Ton-Capacity Bearing Separator9.6Buy On Amazon
3Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Press Kit Puller Set Replacement Installer Removal Automotive Mechanics Tool Kit9.6Buy On Amazon
4Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit9.6Buy On Amazon
5BTSHUB 9 pcs Inner Bearing Puller Set Remover Blind Hole Slide Hammer Internal Extractor Kit9.6Buy On Amazon
6Wheel Bearing Puller Tool Kit Compatible with Harley Davidson Motorcycles - Wheel Bearing Remover Installer Tool Set for 0.75" 1" 25mm Bearings Compatible with Hogs from 20008.8Buy On Amazon
7ABN 16 Piece Blind Pilot Inner Bearing Pullers – Slide Hammer Puller Set and U-Shaped Wheel Bearing Puller Kit8.8Buy On Amazon
812pcs 5 ton Capacity 2" and 3" Bearing Separator Puller Set Splitters Bearings Remover Kit8.4Buy On Amazon
9Astro Pneumatic Tool 78825 25-Piece Master Front Wheel Drive Bearing Puller Removal & Installer Adapter Kit W/Grade 8 Drive Bolt8.2Buy On Amazon
10Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set - Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters8.2Buy On Amazon

Table Of Content:

1. DAYUAN Inner Bearing Puller Set Remover Slide Hammer Internal Kit 8-32mm 9pc Blind Hole

  • Perfect for pulling jobs requiring an internal pull, such as pilot bearings
  • Select the appropriate sized collet by comparing it with the application
  • Includes 8 expandable collets, Fitting a wide range of applications
  • Insert collet, expand it to fit the hole, and attach the slide hammer assembly
  • Slide Hammer Shaft: 1.2ft Long (390mm)

2. Bearing Puller Set

  • EASY OPERATION: Includes everything you need for efficient replacement of small and large wheel bearings on front and rear wheel hubs, pinions, and axle drive shafts on most vehicles.
  • UNIVERSAL COMPATIBILITY: Includes heavy-duty, drop-forged 2” & 3” bar-type bearing splitters and 4” & 5” long hex push-puller legs so you can safely remove large or small bearings on front and rear wheel hub axle shafts without the hassle.
  • HEAVY-DUTY DURABILITY: Built with rugged drop-forged construction and heat-treated to withstand rigorous jobs, this bearing puller set is proven dependable for the long haul.
  • PROTECTIVE CARRYING CASE: Includes a custom-made ABS tool case with precision-sized slots for each component.
  • ALL-IN-ONE TOOL KIT: Includes 14-piece bar-type gear and axle bearing separator, 4-piece 4” (10cm), 4-piece 5” (12.

3. Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Press Kit Puller Set Replacement Installer Removal Automotive Mechanics Tool Kit

  • ALL-IN-ONE TOOL KIT: Everything you need for fast & effective front-wheel drive bearing removal and installation.
  • INCREASE EFFICIENCY: Designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service while reducing damage to the hub and bearings.
  • ULTRA-DURABLE: Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.
  • UNIVERSAL COMPATIBILITY: Works with front-wheel drive hub bearing assembly parts on most front-wheel-drive American domestic and imported cars and small pickup trucks.
  • PORTABLE CARRY CASE: Packed in a custom carry case with precision-sized storage slots for each component, made of premium ABS to protect and extend the life of your tools.

4. Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit

  • DURABILITY, this bearing puller set features high hardness and toughness for optimal performance.
  • WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility.
  • EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
  • PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.
  • PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.

5. BTSHUB 9 pcs Inner Bearing Puller Set Remover Blind Hole Slide Hammer Internal Extractor Kit

  • FUNCTION: Designed to expand against the inner race of the bearing or bushing sleeve.
  • DURABILITY: The bearing puller set features high hardness and toughness for optimal performance.
  • SIZE: Includes eight expandable collets, suitable for sizes from 51/6inch(8mm) to 1-1/4inch (32mm): 8 to 10mm (5/16in to 13/32in);10 to 12mm (13/32in to 15/32in);12 to 14mm (15/32in to 9/19in);15 to 17mm (9/32in to 11/16in);17 to 20mm (11/16in to 25/32in);20 to 24mm (25/32in to 15/16in);25 to 29mm (1in to 1-1/8in);30 to 32mm (1-3/16in to 1-1/4in).
  • EASY TO USE: Opening clamps by turning the handle clockwise to snug against the bearing for pulling out evenly without damage the parts, suitable for both the professional and DIY use.
  • PORTABILITY: Comes in a rugged and reliable plastic carrying case for easy storage and transportation.

6. Wheel Bearing Puller Tool Kit Compatible with Harley Davidson Motorcycles - Wheel Bearing Remover Installer Tool Set for 0.75″ 1″ 25mm Bearings Compatible with Hogs from 2000

  • Compatible with Recent Harleys: This OMT wheel bearing puller tool kit is compatible with most Harley-Davidson motorcycles from 2000 to 2020, installing or removing their bearings in minutes.
  • Inclusive Set: Aside from your wrench, this wheel bearing kit provides everything you need—pullers, bolts, plates, & dowels—to service your machine’s wheel bearings, saving you time and money.
  • Quick & Easy Operation: This tool set installs and removes your hog’s 0.
  • Built to Last: Made of premium 45# stainless steel, this bearing installer and puller set provides strong and dependable long-term service; the threaded rods are further heat treated and blackened for greater strength and corrosion resistance.
  • Convenient Case: This bearing puller set comes with a blow-molded case, organizing the parts and keeping them easy to carry, store, and maintain.

7. ABN 16 Piece Blind Pilot Inner Bearing Pullers – Slide Hammer Puller Set and U-Shaped Wheel Bearing Puller Kit

  • 16 PIECE SLIDE HAMMER BEARING PULLER SET: The ABN | Internal Bearing Puller Slide Hammer Set is designed for loosening and pulling tight bearings and bushings; The 1.
  • QUICKLY REMOVE BEARINGS, BUSHINGS AND REAR AXLES: A bearing slide hammer kit is used to aggressively remove tightly jammed axles, wheeling bearings, and bushings; This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool; This small bearing puller tool is ideal for professionals and do-it-yourselfers.
  • EASY TO INSTALL AND USE: To use, first insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing; Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight; Repeat action until the bearing or bushing has been removed; U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place.
  • BUILT TO LAST: Constructed of a strong, durable chrome molybdenum steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions; This blind bearing puller set has a long steel rod and a T-bar handle; The flared ends of the 1.
  • REAR AXLE BEARING PULLER CONTENTS: This blind hole bearing puller set includes (1) shank and T-bar assembly, (1) 1.

8. 12pcs 5 ton Capacity 2″ and 3″ Bearing Separator Puller Set Splitters Bearings Remover Kit

  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more.
  • Versatile: For a wide variety of pulling jobs; Can remove bearings from a shaft, split bearings, and separate flywheels; Up to 5-Ton (4.
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity; Black oxide finish for corrosion resistance.
  • Easy Storage: Heavy-duty 15” x 9.
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.

9. Astro Pneumatic Tool 78825 25-Piece Master Front Wheel Drive Bearing Puller Removal & Installer Adapter Kit W/Grade 8 Drive Bolt

  • Includes heavy duty 7/8″ grade 8 drive bolt for twice the durability of the industry standard
  • Replace wheel bearings without the need for alignment after by keeping the strut assembly and steering knuckle in place during service.
  • Master set for a wide range of applications
  • Black phosphate coating for a more durable finish
  • 25 piece set including detailed use instructions

10. Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set - Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters

  • SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8″ slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
  • AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
  • SEAL PULLER SET: The 5.
  • BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8″, 1-5/16″ to 2-3/8″, and 1-3/8″ to 2-7/8″ respectively to remove semi-floating rear axle bearings.
  • SUPERIOR DEPENDABILITY: This versatile slide hammer puller set is constructed from 45# structural steel for outstanding strength and durability; the hammer is chrome-plated, its yoke is galvanized, and each adapter is blackened to give you even greater performance, strength, and longevity.

How To Choose The Best Bearing Puller Kit

Does the thought of finding a great Bearing Puller Kit stress you out? Has your mind been juggling between choices when it comes to buying Bearing Puller Kit in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Bearing Puller Kit for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Bearing Puller Kit. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Bearing Puller Kit in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Bearing Puller Kit currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top Bearing Puller Kit brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Bearing Puller Kit based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Bearing Puller Kit before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Bearing Puller Kit they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Bearing Puller Kit, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Bearing Puller Kit before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Bearing Puller Kit will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Bearing Puller Kit if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Bearing Puller Kit on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Bearing Puller Kit on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Bearing Puller Kit featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.
Share This Post

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top